Amcor Bemis, Packaging Photos, and Business Credit Cards: An Admin Buyer's Honest FAQ
- Who is Bemis Company Inc. now that Amcor owns it?
- Do I write "Amcor Bemis" or just "Amcor" on my paperwork?
- What do Bemis manufacturing company photos actually tell me?
- What do you need for a business credit card when you're setting up vendor accounts?
- Can I use an AI flyer maker for product one-pagers and packaging artwork?
- Is "the blackest car wrap" a question for my packaging rep?
- How do I know if Amcor Bemis isn't the right fit for us?
I'm not a packaging engineer. I'm the office administrator who places the orders for a 180-person manufacturer β roughly $340,000 a year across nine vendors, split between facilities, marketing, and the production floor. I report to operations on delivery dates and to finance on every invoice.
Which means my inbox collects a very specific kind of question. Some are about our packaging supplier. Some are⦠not. Here are the ones I've answered most often since Amcor bought Bemis, in roughly the order they show up.
Who is Bemis Company Inc. now that Amcor owns it?
Amcor completed its acquisition of Bemis Company, Inc. in June 2019. Bemis was a Neenah, Wisconsin-based packaging manufacturer, and its healthcare packaging business was folded into Amcor's flexibles segment.
What that means at my desk is messier than the press release suggests. Our purchase orders still reference Bemis part numbers. The invoice header says Amcor. The certificate of conformance that ships with the box says something else again, depending on which plant ran the job.
When I compared a 2018 Bemis spec sheet and a 2023 Amcor sheet for the same part number side by side, the material callouts were identical β same film structure, same sealant layer, same tolerance band. Only the letterhead had changed. That was the moment I stopped worrying that "amcor bemis" meant we'd been quietly switched to a different product.
Do I write "Amcor Bemis" or just "Amcor" on my paperwork?
Both. Put the legacy name in your vendor master as an alias, and keep it on any drawing, spec, or artwork file that references a Bemis part number.
I learned this the expensive way in 2021. We issued a PO to "Amcor" for a part that still carried a Bemis prefix. The invoice came back with the Bemis entity name on it, and finance rejected the expense as a vendor mismatch. It took eleven days and four emails to unhold a $6,800 order that had already shipped. Nobody was wrong. The naming just hadn't caught up to the org chart yet.
What do Bemis manufacturing company photos actually tell me?
More than you'd think, and less than a certificate.
From the outside, a facility photo gallery looks like marketing filler. The reality is it's the cheapest due diligence you can do before you commit to a site visit β if you know what to look for. Three things I check:
- Address match. Does the building in the photo match the address on the ISO 13485 certificate? You'd be surprised how often it doesn't.
- Environment class. Gowning, airlock doors, and posted cleanroom ratings (ISO 7 vs. ISO 8) usually show up in a genuine plant photo. A stock image of a warehouse won't have them.
- Line specificity. Ask for date-stamped photos of the line that will actually run your part. The lobby shot proves nothing.
What photos can't do: substitute for a certificate of conformance, an audit report, or a signed quality agreement. If a supplier sends a glossy gallery and nothing else, that's an answer too.
What do you need for a business credit card when you're setting up vendor accounts?
Different question than most people expect, and I get it constantly from other admins. Short version: the legal entity name and EIN, your business address, annual revenue, and β for most small and mid-size companies β personal information for whoever signs, because the issuer will pull a personal credit report.
If you're setting up a corporate card program rather than a single card, add a written spend policy and named approvers. Ours caps single transactions at $5,000 and requires a second approval above that. It sounds bureaucratic until the month someone put a $12,000 tooling deposit on a card with a $10,000 limit.
Honest limitation: a credit card isn't always the right tool for vendor purchasing. If your volumes are predictable, a net-30 account with the vendor beats a card β no limit to manage, no statement reconciliation, and the payment terms land on your DSO instead of your balance. Requirements vary by issuer, so confirm the current documentation list with your bank before you fill anything out.
Can I use an AI flyer maker for product one-pagers and packaging artwork?
Two very different jobs wearing the same name.
For an internal one-pager, a sales leave-behind, or a spec summary that lives on a screen β yes, an AI flyer maker is fine. I use one for our monthly vendor scorecard summary and it saves me maybe ninety minutes.
For anything going to a printer, no. It's tempting to think "it's just a flyer, resolution doesn't matter." But commercial print runs at 300 DPI at final size, which is an industry minimum, not a preference. A 3.5 Γ 2 inch business card at 300 DPI needs 1,050 Γ 600 pixels. Most AI flyer exports come out closer to 72β150 DPI in RGB, and scaling those up gives you mush.
Color is the other trap. Pantone colors often don't have exact CMYK equivalents. Pantone 286 C β the corporate blue half our industry uses β converts to approximately C:100 M:66 Y:0 K:2, but the printed result shifts with substrate and press calibration. Industry tolerance for brand-critical color is Delta E < 2; between 2 and 4 a trained eye catches the drift, above 4 most people do. An AI tool generating "a nice blue" has no idea any of that exists.
If you need to argue the case internally, point at the Pantone Color Bridge guide for conversions and the standard 300 DPI commercial print spec. Both are quotable, and neither is a vendor's marketing claim.
Is "the blackest car wrap" a question for my packaging rep?
No, and I've watched people lose two weeks assuming otherwise.
Automotive vinyl wrap is a different supply chain. It's cast PVC film from companies like 3M and Avery Dennison, installed by wrap shops, engineered against entirely different durability specs β vertical versus horizontal panels, multi-year outdoor ratings, removable adhesive systems. Amcor Bemis makes flexible packaging film: barrier structures for food, medical, and industrial applications. It's film, technically. It isn't car wrap.
It's tempting to think "film is film, ask the film guy." But the two products are built against different failure modes. Packaging film fails on barrier, seal integrity, and migration. Wrap film fails on UV fade, edge lifting, and adhesive residue.
If you actually need fleet graphics, call a wrap shop directly. One exception: if you're evaluating an opaque black film for a product application β a pouch, a sachet, a device cover β that is a legitimate question for your packaging supplier, and a completely different conversation.
How do I know if Amcor Bemis isn't the right fit for us?
This is the part most supplier FAQs skip, so here it is plainly.
I recommend them for regulated healthcare and medical device packaging, multi-site consistency, and any program where you need the same structure running in three plants. That's where the engineering depth pays for itself. I'd put up with the naming confusion and the slower pre-press workflow all day for that.
Where I'd look elsewhere:
- Very short runs and prototyping. If you need 50 units next Tuesday, minimum order quantities and tooling lead times will bury you. A local converter beats them on speed every time.
- Commodity single-color cartons. Simple spec, steady volume β you're paying for capability you're not using.
- Programs that need hand-holding on artwork. Large suppliers run structured pre-press workflows. They're excellent at them, but they aren't going to sit with your marketing team and iterate on a design for three weeks.
None of that is a knock on the product. It's just that if you fall into the other 20%, forcing the fit costs more in frustration than the unit price saves you.
That's the whole list. If your question isn't here, it's probably because I haven't made that mistake yet.
Ready to Transition to Sustainable Packaging?
Our packaging specialists can help you navigate the trends and find the right solution for your products.