Bemis, Clear Body Bags, and $4,000 Vinyl Wraps: An FAQ From a Buyer Who Learned the Hard Way
- Wait—is Bemis still its own company, or is it all Amcor now?
- Does Bemis still have a stock ticker?
- What do I check before ordering clear body bags?
- Why do full car vinyl wrap quotes range from $2,000 to $6,000+?
- How do you make a shipping label without getting surcharges?
- What's the biggest packaging-buying mistake you see?
I've been buying packaging and print for eight years. Fourteen documented mistakes. About $19,400 in wasted budget—or rather, $19,400 I can prove, plus a pile I'd rather not think about. Below are the questions I get asked most, answered with the mistakes attached.
Wait—is Bemis still its own company, or is it all Amcor now?
Both. Sort of.
From the outside, it looks like Bemis just vanished after 2019. The reality is messier. Amcor acquired Bemis in an all-stock deal that closed June 11, 2019, valued at roughly $6.8 billion. Bemis stopped operating as an independent public company that day.
What didn't disappear: the product lines. You'll still see Bemis healthcare packaging, Bemis sharps containers, and Bemis medical films in catalogs, on spec sheets, and on the boxes themselves. Basically, the brand lives on inside Amcor's healthcare packaging segment even though the corporate entity is gone.
Why this matters for buyers: contracts get messy after an acquisition. I once sent a PO to a Bemis address that had been folded into an Amcor billing entity, and it sat for eleven days before anyone told me. Lost a week on a rush order because of an outdated vendor record. Now I verify the legal entity and remit-to address every time a supplier gets acquired.
Does Bemis still have a stock ticker?
No. BMS was retired after the acquisition closed in June 2019.
People think a ticker just changes hands and the history carries over. Actually, the listing is done—delisted, converted into Amcor shares at 5.185 Amcor shares per Bemis share. If your old spreadsheet still lists BMS as a holding, it's stale.
Dodged a bullet on this one, sort of. A colleague in finance asked me to pull BMS financials for a vendor health check back in 2021. Two minutes of Googling saved me from presenting 2018 numbers as current. Lesson: any time a supplier gets acquired, re-run the financial check from scratch—don't trust cached data.
What do I check before ordering clear body bags?
First, clarify what you actually mean. Clear body bag gets used for two different things: the clear polyethylene bags used for shipping and mailing, and the heavier clear bags used in medical or specimen transport. Different specs entirely.
For the shipping kind—which is what most people mean—check these:
- Gauge. Heavy duty means nothing. Ask for mil thickness. 2 mil is standard for light shipping; 4 mil for anything with sharp edges.
- Size tolerance. A 9×12 bag is rarely exactly 9×12. If the fit is tight, order a size up.
- Suffocation warning. If the bags are 5×5 inches or larger and headed to US retail, a warning is usually required on the bag. Confirm before you print.
My mistake: ordered heavy duty clear bags for a batch of industrial parts, assumed heavy duty meant 4 mil. It was 2 mil. Bags split in transit on 40 of 200 shipments. $1,100 in replacement product plus a very unhappy account manager.
Why do full car vinyl wrap quotes range from $2,000 to $6,000+?
Because you're mostly pricing labor, not film.
People assume the expensive quote means premium material. The reality is that the film is often only a few hundred dollars of the total. The rest is disassembly, prep, panel work, and installer experience. A cheap quote on a complex vehicle usually means corners get cut in prep—and prep is where wrap failures start.
Rough pricing as of January 2025 for a full wrap on a standard sedan or small van:
- Economy film, simple body, minimal prep: $2,000–3,500
- Mid-range film, moderate complexity: $3,500–5,000
- Premium cast vinyl (5–7 year warranty), complex body or fleet graphics: $5,000–7,000+
Verify current rates with local installers—prices swing a lot by region.
The most frustrating part of buying wraps: the cheap guy swears he's using 3M or Avery and he's just more efficient. Sometimes true. Usually not. I went with the cheapest quote on a company van in 2022. Film bubbled at 14 months. Redo was $1,300 plus two weeks without the van. Ask for the film brand and warranty in writing. At least, that's been my experience on fleet jobs.
How do you make a shipping label without getting surcharges?
You make it in software, not by hand. That's it. That's the answer.
Hand-written or manually-keyed labels are where surcharges live. Wrong weight, wrong dimensions, wrong service class—every carrier will happily bill the difference 90 days later when you've stopped paying attention.
Three things to get right:
- Weigh and measure the actual packed box. Not the product. Not the typical box. The one in front of you.
- Standardize the address. Use the carrier's address validation. A missing suite number triggers a correction fee every time.
- Use a thermal printer. Laser-printed labels smudge and get rejected more often than you'd think. A $150 thermal printer paid for itself in about a month.
My worst: printed 180 labels with the wrong return ZIP. Caught it on label 12. So glad I ran a test batch first—saved myself roughly $400 in reprints and a genuinely awkward call with the account.
What's the biggest packaging-buying mistake you see?
Buying on unit price alone.
People assume the lowest per-unit quote wins. What they don't see: freight, setup and plate fees, minimum-order penalties, and the cost of reorders when the cheap vendor misses a spec. Landed cost—unit price plus freight plus the risk of a redo—is the only number that means anything.
After the third time a cheapest quote blew up—this was Q1 2024—I built a pre-check list that has to be filled out before any PO goes out. It's basically a landed-cost template. We've caught 30-some pricing errors and spec mismatches in the last 14 months using it. Honestly, it's the single most useful thing I've built in this job.
Bottom line: ask for total delivered cost, in writing, freight included, with an expiration date on the quote. If the vendor can't put that in an email within a day, that tells you something too.
Ready to Transition to Sustainable Packaging?
Our packaging specialists can help you navigate the trends and find the right solution for your products.