๐ŸŒฟ Sustainable Packaging Solutions: Get 15% OFF on Your First Order with FSC Certified Materials!
Mon-Fri: 8:00 AM - 6:00 PM EST

Bemis Packaging Checklist: 5 Steps I Verify Before Every Order (A Pitfall Documenter's Guide)

Who This Checklist Is For (And Why I Built It)

I've been handling packaging orders for 9 years. In my first 3 years, I made 6 significant mistakes totaling roughly $23,000 in wasted budget. Now I maintain our team's checklist so nobody else repeats my errors.

Here's the thing: most of my mistakes weren't from laziness. They were from assuming I already knew the answer. And after Amcor acquired Bemis (the deal closed in 2019), a lot of "what I knew" quietly stopped being true.

This checklist covers 5 steps. Each one takes 2-3 minutes. Together, maybe 12 minutes total. I run through it before every Bemis order, and I've caught 47 potential issues in the past 18 months alone.

If you order industrial packaging, healthcare packaging, or sharps containers from Bemis, this is for you.

Step 1: Verify Who You're Actually Ordering From (And Which Process Applies)

This is the one I do first now. Before Amcor acquired Bemis, ordering was straightforward โ€” you had a rep, you had a spec sheet, you placed the order. After the acquisition, the integration process meant that reps changed, systems changed, and in some cases, product lines got consolidated or shifted.

In 2023, I submitted a healthcare packaging order using a contact name from a 2020 spec sheet. The rep had left in 2021. My order sat in a queue for 4 days before anyone told me. $240 in rush fees later, I learned to check contact validity every single time.

How to verify:

  • Request a current quote โ€” check the company name, logo, and contact details. If it says "Bemis" without any Amcor branding, ask whether that's still the active entity for your region.
  • Confirm whether your rep is still in their role. A quick "Are you still my main contact for X?" email saves days of delay.
  • Ask directly: "Has our ordering process changed since the Amcor integration?" They'll usually tell you if there's a new portal or PO system.

To be fair, the Amcor acquisition wasn't a bad thing. Resource access got better, and the product catalog expanded in some areas. But that doesn't mean your old process still works. Here's my mixed feeling about it: I appreciate the expanded capabilities, but I don't love how quietly some of the process changes happened. You have to ask.

Looking back, I should have verified my contact list the moment the acquisition news hit. At the time, I figured "same company, same people." That wasn't quite right.

Step 2: Lock Down Healthcare Packaging Specs (These Are Not Generic)

Bemis healthcare packaging is a different beast. The tolerances are tighter, and the documentation requirements are strict. I learned this the hard way in 2021.

I ordered 2,000 sharps containers using a spec sheet from 2019. What I didn't know: Bemis had upgraded some of its molding lines in 2020, and the wall thickness spec had shifted by 0.5mm. My whole batch failed incoming inspection. $4,200 and a 1-week delay.

How to verify:

  • Request the current product data sheet โ€” not the one in your files, not the one from the last order. Current.
  • Confirm applicable certifications. Healthcare packaging often needs specific compliance documentation (ISO, FDA, etc.). Ask if anything has changed.
  • Ask the golden question: "Have the specifications changed since my last order?" It's specific enough to get a real answer.
  • Request a first-article sample for any healthcare order above a certain quantity threshold. The $50-100 sample fee is cheap insurance.

For reference: according to public B2B packaging pricing data (2024), sharps containers typically land in the $2-5 per unit range for certified batches, depending on volume and specs. Verify current pricing with your supplier โ€” don't rely on older quotes.

The surprise wasn't that specs changed. It was that nobody told me. Turns out, when you've been a customer for years, some suppliers assume you already know. You don't. Ask.

Step 3: Verify Dimensions in Writing (The 24ร—36 Trap)

This one sounds dumb. It isn't. Dimensional confusion is one of the most common sources of rework in packaging.

Example: a client asked us to source packaging for a 24ร—36 poster. That's a common print size โ€” 2 feet by 3 feet. Simple, right? Except: I assumed "24 wide by 36 high." They meant "36 wide by 24 high." I ordered 300 boxes with the wrong orientation. $620 in rework, 4 days lost.

How to verify:

  • Write out the dimensions in words: "24 inches wide by 36 inches tall" โ€” never just "24ร—36."
  • Confirm orientation. Which number is width? Which is height? Which is depth?
  • Confirm inner vs. outer dimensions. A box that fits a 24ร—36 poster needs inner dimensions slightly larger than that. Outer dimensions are useless for fit.
  • Confirm what goes inside. A poster is flat. A water filtration bottle is cylindrical. The packaging has to account for both shape and fragility.

I went back and forth between just writing "24ร—36" (because that's what the client said) and writing a full sentence description. I ultimately chose the full sentence. The client corrected me โ€” it was the opposite orientation. That 2-minute awkward email saved 300 boxes.

Step 4: Don't Assume Material Specs Are Transferable

Different products need different packaging materials. This sounds obvious. It isn't always obvious in practice.

Consider: a water filtration bottle needs moisture barrier protection and a good seal. If the packaging seal is compromised, the filter media absorbs ambient moisture and degrades. A sharps container needs rigidity and puncture resistance. Coffee packaging โ€” yes, this is an outlier example, but stick with me โ€” needs a one-way degassing valve to release CO2 while keeping oxygen out.

In 2022, I specified the same material for a water filtration bottle packaging order that we'd been using for a coffee product line. On paper, it looked fine โ€” both food-safe, both moisture-resistant to a degree. But coffee packaging's moisture barrier isn't rated for long-term storage of moisture-sensitive filtration media. 500 sets of packaging degraded in storage. ~$1,800 loss.

How to verify:

  • Identify your product's specific sensitivity: moisture, oxygen, light, puncture, compression. Write it down.
  • Request the material spec sheet and read the barrier ratings. Don't skim. Compare against your product sensitivity list.
  • Ask: "What storage conditions is this material rated for?" If the answer is vague, push for specifics.
  • Ask: "What's a known failure scenario for this material?" Suppliers who know their products will answer this honestly.

Granted, this requires more upfront work. But it's cheaper than scrapping a batch.

Step 5: Verify Specific Parameters โ€” 'Common Sense' Is a Trap

People search "how much caffeine in a cup of coffee" expecting a single, clean answer. There isn't one. It's roughly 60-150mg depending on brew method โ€” drip coffee around 95mg, espresso about 63mg per shot, cold brew potentially higher. The point: "common knowledge" varies more than people expect.

Same applies to packaging:

  • "Medical packaging is always white" โ€” not true. Some product lines use color-coding for size or type differentiation.
  • "Box strength is fine for stacking" โ€” depends on stack height, weight, humidity, and duration.
  • "This is the standard size" โ€” whose standard? Bemis has its own; your previous supplier had theirs.

In early 2024, I assumed a "standard" wall thickness for a sharps container order based on what I'd seen before. The batch failed compression testing at the client's warehouse. $2,900 in rework plus a 1-week production delay. The standard had been updated for that product line 8 months earlier.

How to verify:

  • Get it in writing. Verbal confirmation is not a spec. If it's not on a data sheet or order confirmation, it doesn't exist.
  • Ask for test reports on critical parameters โ€” compression, puncture, seal strength. If they don't have them, that's a data point too.
  • Ask about tolerances: "What's the acceptable range for this spec?" If there's no stated range, the spec is probably vague.
  • When someone says "just use the standard," ask: "Which standard, and what's the revision date?"

Common Mistakes I Still See (And How to Avoid Them)

Even with a checklist, people find new ways to mess up. Here are the ones I see most often:

  • Using an old spec sheet. Acquisitions, line upgrades, and supplier changes all invalidate old paperwork. If your spec sheet is more than 12 months old, re-verify.
  • Assuming "standard" exists. It doesn't. Every supplier defines their own standard. Get the spec, not the label.
  • Skipping the first-article sample. For healthcare packaging especially, one sample can save thousands. Order it.
  • Treating verbal confirmation as a spec. If your rep says "yeah, that's fine" on the phone, it's not a spec. Get it in an email or on the PO.
  • Mixing up units. Millimeters vs. mils, inches vs. centimeters, pounds vs. kilograms. I've seen a 25mm spec entered as 25 mils (0.635mm). That one wasn't mine, but I watched it happen.

I keep this 5-step checklist on a single page and re-verify every time. It takes 10-12 minutes. But it's saved me from repeating the $23,000 worth of lessons I already paid for.

If you're ordering Bemis healthcare packaging or industrial packaging and you're not running through something like this โ€” start. The specs change. The materials change. The processes change. Your checklist shouldn't.

$blog.author.name

Jane Smith

Sustainable Packaging Material Science Supply Chain

Iโ€™m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Ready to Transition to Sustainable Packaging?

Our packaging specialists can help you navigate the trends and find the right solution for your products.