🌿 Sustainable Packaging Solutions: Get 15% OFF on Your First Order with FSC Certified Materials!
Mon-Fri: 8:00 AM - 6:00 PM EST

Bemis Packaging QC Checklist: 7 Checks I Run Before Approving Any Order

I've been doing packaging quality control for almost five years now. Four of those have been as a quality/brand compliance manager at a mid-size manufacturer—we spend about $14 million a year on industrial packaging, and a fair chunk of that goes to Bemis orders. Our rejection rate on first deliveries from Bemis was around 8% in 2024. That's down from 12% in Q2 2023, when we finally put a proper checklist in place.

Here's the thing: Bemis is a strong supplier. That's why we keep using them. But "strong supplier" doesn't mean "skip the verification." I've seen what happens when you do.

What follows is the exact 7-step checklist I use before I sign off on any Bemis packaging order. Whether you're ordering standard industrial packaging or medical-grade sharps containers, these steps apply.

Step 1: Confirm Which Bemis Entity You're Actually Dealing With

"Bemis" isn't just one thing anymore. It's a brand, a manufacturing company, and—since 2019—a subsidiary of Amcor.

The Amcor Bemis acquisition closed in June 2019, and it changed a lot behind the scenes: some production facilities were consolidated, some compliance documentation templates were updated, and some product lines kept the Bemis name while getting folded into Amcor's broader quality management system. When you place an order, you need to know:

  • Which legal entity is issuing your contract and invoice?
  • Which specific factory is handling production?
  • Has the quality documentation (CoA, compliance certificates) been updated to reflect the Amcor Bemis structure?

My rule: every purchase order includes the supplier's DUNS number and the exact facility address. I don't accept "Bemis" as a supplier name on any document. It has to say which Bemis.

This matters most for healthcare packaging. I've seen a certificate of analysis come through with a Bemis letterhead and no mention of Amcor—and then a separate supply chain audit doc that references the "Amcor Bemis Quality Manual." If you don't know which system your order falls under, you don't know which complaint process to use when something goes wrong.

Step 2: Cross-Check Every Number in the Spec Sheet

This sounds basic, but it's where most problems start.

What I verify line by line:

  • Dimensional tolerances (especially wall thickness and lid-seal fit)
  • Material weight and formulation (the sterile barrier layer in medical packaging can't deviate)
  • Color specs (if there's a brand color, demand a Pantone reference)
  • Print content version number (confirm you're working from the latest revision)

Three details most people miss:

  • Material lot traceability requirements. Can the supplier trace a finished unit back to the raw material batch? For medical packaging, this is non-negotiable.
  • Drop test standards. What's the pass/fail threshold, and who runs the test?
  • Sterilization compatibility. If your packaging goes through EtO or gamma sterilization, the material spec needs to account for it—not every resin formulation handles it the same way.

These aren't on the standard spec sheet. But when they're wrong, the consequences dwarf a dimensional deviation.

Step 3: Validate Healthcare Packaging Certifications

If your order involves medical device packaging or sharps containers, this step is mandatory.

Bemis's healthcare packaging division built its reputation on cleanroom capabilities and sterile barrier performance. But reputation isn't a guarantee. I check:

  • Is the facility's ISO 13485 certificate current and does the scope cover your product category?
  • Has the sterile barrier system been tested to ASTM F1980 (accelerated aging) or equivalent?
  • What's the date on the most recent bioburden test report?

I caught a certificate last year that was still valid but whose scope had been narrowed three months prior—it no longer covered the class of sharps containers we were ordering. The certificate was real. It just didn't apply. No one on the supplier side caught it because they were looking at the expiration date, not the scope statement.

Step 4: Run Sharps Container-Specific Checks

Sharps containers are a different category. They're not just "a plastic box"—they're regulated safety devices.

Additional verification points:

  • OSHA 1910.1030 compliance (closable, puncture-resistant, leak-proof on sides and bottom)
  • Lid locking mechanism—has it passed the child-resistant or tamper-evident test if required?
  • Stacking load capacity—how many units high before deformation?

That stacking point is the one most buyers ignore. If your warehouse uses pallet racking with a 1.8-meter clearance per level, and your container is 60 cm tall, you can fit three units per shelf—not four. Packaging designed without considering your storage layout creates hidden costs that never show up on the quote.

Even something as simple as how long the average water bottle is (around 20–25 cm for a 500 mL bottle) matters here—container outer dimensions have to match both your internal logistics and your end-user handling patterns. A 2 cm difference in package length can mean the difference between smooth palletizing and a warehouse team that hates you.

Step 5: Lock Down Lead Times and Build in Your Own Buffer

Bemis is a manufacturing company at its core—bemis manufacturing company is the phrase people in the industry actually use when they're talking about its engineering and production capacity. That capacity comes with scheduling realities you need to plan around.

What I confirm:

  • Standard lead time (in weeks, not days)
  • Peak season impact—Q3 and Q4 almost always add time for medical packaging
  • Custom color or tooling timeline

I add 30% on top of whatever the supplier quotes. Not because Bemis is unreliable—but because supply chains are. We ordered a batch of custom medical trays in 2023. Production finished on time. But logistics added 11 days due to port congestion. We didn't miss our customer deadline because of that 30% buffer. Without it, we would have.

Step 6: Full Inspection on First Articles—Not Sampling

If this is your first order with Bemis, or you've changed a spec, don't just spot-check a handful of units and call it good.

My process:

  • Pull 10 units. Measure every critical dimension on all 10.
  • Run an actual load test (for containers).
  • Check print color consistency under natural light and warehouse lighting.
  • Verify outer carton dimensions against your racking and shipping requirements.

The outer carton dimension check is the one that bites people. A carton that's 2 cm too wide can mean fewer units per pallet, which cascades into higher freight costs over a full year. Do the math before you approve the first article—not after the third reorder.

Step 7: Get Written Acceptance Criteria—in the Contract

This is the step people skip most often. It's also the one that saves the most money.

Your written criteria should cover:

  • Acceptable defect types and ratios (e.g., print color deviation ΔE ≀ 3)
  • Functional test sampling rates and pass/fail thresholds
  • Disposition process for non-conforming product (return, rework, or accept-at-discount?)
  • Who holds final authority on acceptance decisions

We learned this the expensive way. In 2023, a Bemis order came in with slight print color variation from the previous batch. The supplier said it was "within industry standard." We said it didn't match our reference. No written criteria meant no grounding for either side. We split the difference and half-reprinted. That cost us $22,000, plus two weeks of delayed launch.

Now, every purchase contract includes a two-page acceptance criteria addendum. Both sides sign it. It's attached to the PO. No ambiguity.

A note on travel costs: if your team needs to visit a Bemis manufacturing facility for a pre-production audit, those expenses typically go on the company Visa business travel card (or whatever corporate travel card your finance team issues). Budget $2,000–$4,000 per trip for domestic audits. Some teams try to save that by patching together a virtual audit—and sometimes that works. But for first-time healthcare packaging orders, I'd argue the in-person visit pays for itself. As for comparing rewards rates on the United Explorer business card? That's a separate conversation—and if you're optimizing credit card points while ignoring an 8% rejection rate on incoming packaging, your priorities are inverted.

Common Mistakes to Avoid

These are the ones I see repeatedly:

  1. Treating "Bemis" as a single factory. It's a brand and a manufacturing company—but different product lines run on different sites. Your audit report needs the facility address, not just the brand name.
  2. Using consumer-product acceptance logic. Consumer packaging tolerates variation. Industrial and medical packaging don't. Your customer here is your production line, not a retail shopper.
  3. Assuming Amcor integration is seamless. It's been five years, and most processes are aligned. But some legacy Bemis workflows still exist. Confirm which system your order follows before problems surface.
  4. Comparing base unit price only. A cheaper box that causes line downtime or a customer return costs ten times its quoted price in real terms. Total cost includes freight, rework, and risk.

This list won't eliminate every problem. But it'll catch the majority of the ones that reach your dock. The rest comes from experience—and from building a supplier relationship where the other side knows you check, and knows what happens when you find something wrong.

$blog.author.name

Jane Smith

Sustainable Packaging Material Science Supply Chain

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Ready to Transition to Sustainable Packaging?

Our packaging specialists can help you navigate the trends and find the right solution for your products.